AJ Bike equipment are offical UK importers and retailers for Bar Mitts ©

At AJ Bike Equipment we find that Bar Mitts © not only to be an excellent alternative to winter gloves but to be better than anything else we have tried. They keep the wind and weather off your hands whilst keeping your dexterity, enabling you to easily work the breaks and gears. The neoprene Bar Mitts ©  holds their shape allowing you to easily slide your hands in and out when needed. These excellent Mitts are new to the UK market after proving to be a great success across the Atlantic see www.barmits.com

 

Why Bar Mitts Rock; 

• Bar Mitts are easily installed and removed (see below)
  
• Bar Mitts stay secure on the handle bars while riding allowing your hands to slide in and out without difficulty.
  
• Braking and shifting are easily accomplished - no more sausage fingers in thick cumbersome gloves.
• Bar Mitts are made of  5.5 mm neoprene with a nylon laminate on each side, this provides a waterproof and windproof cover
• The neoprene holds it's shape allowing the you to easily slide your hands in and out. 

 

This  year there are some minor changes that have been made to the mountain mitts. They now have more room in the brake cable handle bar area and added two stripps of Velcro hooks and a large area of Velcro hoops to attache them to.  This will make it much easier and quicker to close this area up and get out on those cold winter rides - see the picture below:

 

 

 

 

 Our Guarantee

 We are so confident that you will like our product that if you are not satisfied with your purchase return it to us within a month and we will refund you your purchase price and give you £5 for your inconvenience. Bar Mitts are also Guaranteed for life against manufacturers' defects in materials and workmanship. If a product ever fails due to a manufacturing defect, we will repair it without charge, or replace it.

Click here to order

Any more questions then please contact us

 

How to fit Bar Mitts for Mountain/Comuter bikes

 

 

 

Step 1:Start with opening the Velcro cinch next to the zipper. Unzip the zipper. This opening allows the Mitts to clear the brake & shift levers upon installing.

Step 2:   There is a strip of neoprene and a Velcro cinch on the inside of the Mitt that attaches to the handle bar end (this will keep the Mitts in position when putting hand in). Keep the cinch loose before installing.

Step 3: Slide the Mitt on over the handle bar end and brakes / shifters. To secure the inside strip of neoprene and Velcro cinch, put one hand in through the zipper opening and the other hand through the hand opening. Manoeuvre the neoprene and cinch over the handle bar ends so the neoprene covers the bar end as you look into the Mitt. Then tighten the Velcro cinch in place.

Step 4: Zip up the zipper and secure the outside Velcro cinch to close up the opening around the cables and handle bar.

 

How to fit Bar Mitts for drop handle bars.

 Step 1. Open the zipper and slide the lower end of the handle bar through the inside of the Bar Mitt and then through the small hole on the bottom of the Bar Mitt. Note: There is a left and right Bar Mitt. The zippers should face each other when installed.

  Step 2. Pull the Bar Mitt up onto the handle bar until it is covering the shifter and brake levers.

 

Step 3. Position the hole next to the cuff onto the handle bar top and secure the velcro tabs.

 

 

 

 Step 4. To keep the zipper in the closed position, zip up zipper and secure the velcro tab over the zipper.